SimmTronic E-Bus & O-Bus / M-Bus Cables FS Cables are the sole appointed supplier of SimmTronic
E-Bus, O-Bus and M-Bus SPECS 3 cables. Manufactured to very high tolerances using Low Smoke Halogen
Free compounds throughout you can be confident the cable will fit the
connectors first time and every time, resulting in a trouble free installation
you can rely on. Be careful of imitations, only use the authentic Simmtronic
SPECS 3 cable printed with the Simmtronic logo.
The SimmTronic SPECS 3 system offers fully addressable lighting solutions tailored to the clients needs. Through the use of digital technology and Low Smoke Halogen Free cabling the SPECS 3 system has proved to be a favourite choice for large office developments and many major public buildings in the U.K. For more information on SimmTronic click here: www.simmtronic.com E-Bus 1 Pair 18 AWG For connection of switches & sensorsThe SimmTronic E-Bus range features 18(16)AWG tinned copper conductors, Low Smoke Halogen Free insulation, cores twisted into a pair and a Low Smoke Halogen Free sheath. Available in white as standard for general system connection bus wiring and in blue to differentiate function or E-Bus route according to project requirements.Technical Information
O/M-Bus 1 Pair 18 AWG For connection of LMCs without mainsborne signallingThe Simmtronic O-Bus and M-Bus series feature 18(16)AWG tinned copper conductors, Low Smoke Halogen Free insulation, cores twisted into a pair, and a Low Smoke Halogen Free sheath. The pink sheath denotes suitability for connecting LCMs when not using mainsborne signalling.Technical Information
|
![]() |
|||||||||||||
C-Bus 1 Pair 22AWG For connection of area controllers and PC gateway22(7)AWG tinned copper conductors, polyethylene insulation, cores twisted into a pair, polyester tape, aluminium/foil screen & 22(7)AWG stranded tinned copper drain wire, Low Smoke Halogen Free outer sheath – Grey. Technical Information
|
Technical Data |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
A full range of LSHF flexes are available
for LCM Luminaire plug wiring |
||||||||||||||||||||||||||||||||||||||||
At FSC we refer to LSHF as Low Smoke Halogen FreeThis term is interchangeable with LSZH (Low Smoke Zero
Halogen), LSOH (Low Smoke Zero Halogen), OHLS (Zero Halogen Low Smoke)
and FRNC (Flame Retardant Non-Corrosive). Beware of the terms LSF (Low
Smoke and Fume) or RP (Reduced Propogation), when relating to signal or
control cables will normally be modified PVC and produce 'Loads of Smoke
and Fume'!
Fire retardant, fire resistant, flame resistant or flame retardant?These terms are often misunderstood. Most cables when
exposed to fire will not carry on functioning. If you require cable to
continue working in the event of fire, and in accordance with various
standards please call us. |
||||||||||||||||||||||||||||||||||||||||